Gw4 Disconnector High Voltage Outdoor Disconnect Switch Isolation Switch

• Type: High-voltage
• Structure: Three-column Disconnector
• Installation: Indoor High-voltage
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Gw4
• Operation: Electric
• Grounding Mode: Grounding
• Movement Mode: Plug-in Type
• Number of Poles: Three Pole
• Grounding: Un Grounded
• Series: Three
• Run: Plug-In
• Switching Mode: Single Throw-in
• Common Model: Gw
• Structure of Operating: Electric
• Certification: ISO, CE
• Brand: Chsh
• Transport Package: Export Standard Carton
• Trademark: CHSH
• Origin: China
• HS Code: 8535301090
• Production Capacity: 500 Pieces/Week
• Package Size: 100.00cm * 100.00cm * 100.00cm
• Package Gross Weight: 100.000kg

Product Description

GW4 AC high-voltage isolating switch is suitable for power systems with a rated voltage of 126kV. It is used for no-load switching of high-voltage lines and for electrical isolation of electrical equipment such as high-voltage busbars and circuit breakers under inspection from live high-voltage lines.

Conditions of Use
1. The altitude does not exceed 1000m, and the special type does not exceed 4000m.
2. The highest ambient temperature does not exceed +40°C, the lowest is -35°C, and the temperature is -40°C in alpine regions.
3. The outdoor wind speed does not exceed 34m/s.
4. Pollution-resistant type is suitable for moderately polluted areas.
5. The thickness of ice coating shall not exceed 10mm.
6. The seismic intensity does not exceed 8 degrees.
7. The installation site should be free from gases, vapors, chemical deposits, dust, dirt and other explosive and corrosive substances that seriously affect the insulation performance and conductivity.
8. There should be no severe vibration in the installation place.

Features
1. The structure of the bearing turntable is improved, so that the bearing seat can realize the waterproof function. It is also equipped with an oil injection hole and an adjusting screw, the switch has a strong integrity and the maintenance is simpler and more convenient.
2. The copper welding process is adopted between the conductive rod and the contact, and between the conductive rod and the contact finger seat. In addition, a soft connection is installed between the contact finger and the contact finger seat, so that the main circuit resistance of the product is significantly higher than that of the screw connection. Reduced, thereby reducing the heating problem of the contacts during operation. The grounding guide rod is made of aluminum alloy with excellent conductivity, and the contact part is made of copper. The connection between the conductive rod and the base and the grounding contact finger seat are all equipped with soft connections, so the grounding reliability of the grounding circuit is greatly enhanced.
3. The exposed part of the main conductor adopts the surface treatment process of copper plating with silver, and the surface is smooth, beautiful, strong in corrosion resistance and durable.
4. Improve the shaft and hole matching method: the iron and copper matching is changed to copper and copper matching or stainless steel and copper matching, which solves the phenomenon of rust and death in long-term outdoor use. The exposed standard parts are made of stainless steel; the metal parts are treated with hot-dip galvanizing, and the corrosion resistance of the switch is stronger.
5. A large number of precision castings are used to replace welded parts to reduce safety problems such as weak welding.
6. The grounding knife switch can be interchanged left and right at the construction site, and the coaxial linkage mode is changed to unipolar linkage, which greatly reduces the difficulty of installation on the construction site.