Kyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch Board

Product Details
Customization: Available
Certification: ISO9001, CE
Shell Material: Stainless Steel
Manufacturer/Factory & Trading Company

360° Virtual Tour

Diamond Member Since 2022

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

Quality Assurance
The supplier provides quality assurance
Management Certification
The supplier has quality management system certification, including:
ISO9001:2015 certificate
ISO45001:2018 certificate
ISO14001
R&D Capabilities
The supplier has 10 R&D engineers, you can check the Audit Report for more information
Importers and Exporters
The supplier has import and export rights
to see all verified strength labels (23)
  • Kyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch Board
  • Kyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch Board
  • Kyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch Board
  • Kyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch Board
  • Kyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch Board
  • Kyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch Board
Find Similar Products
  • Overview
  • Product Description
  • Detailed Photos
Overview

Basic Info.

Model NO.
KNY28
Installation
Removable
Structure
Cabinet
Current
DC
Phase
Three
OEM
Avaliable
Frequency
50Hz
Rated Voltage
3.6kv /7.2kv/12kv
Protection Level
Enclosure IP4X
Transport Package
Export Standard Wooden Case
Specification
800*1500*2300
Trademark
CHSH
Origin
China
HS Code
8537209000
Production Capacity
100 Pieces/Week

Product Description

Product Description

 KYN28 indoor metal-clad withdrawable switchgear(hereafter short as switchgear) is a complete power distribution device for 3.6~24KV, 3 phase AC 50Hz, single bus sectionalized system. It is main used for power transmission of middle/small generators in power plants, power receiving, transmission for substations in power distribution and power system of factories, mines and enterprises, and starting of large high-voltage motor, etc, so as to control, protect and monitor the system. The switchgear meets IEC298, GB3906-91. In addition to be used with domestic VS1 vacuum circuit breaker, it can be used with VD4 from ABB, 3AH5 from Siemens domestic ZN65A, and VB2 from GE, etc. It is truly a power distribution deviece with good performance.

In order to meet the requirement for wall mounting and front-end maintenance, the switchgear is equipped with a special current transformer, so that the operator can maintain and inspect it in front of the cubicle.

Working  environment

1. The ambient air temperature : -5°C ~ +40°C;
2. Daily average temperature(Within 24h): ≤+35ºC
3. Altitude : less than 1000m;
4. Relative humidity: within 24h, daily average value ≤ 95% , daily average vapor pressure≤ 2.2KPa;
    monthly average value ≤ 90%, monthly average vapor pressure≤ 1.8KPa
* Ambient air is not significantly polluted by dust, smoke, corrosive and / or flammable gas, vapor or salt contamination
Detailed Photos

Kyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch BoardKyn28-12 Drawout Metal-Clad Switchgear Main Switchboard Switch Board1. Are you a trading company or manufacturer?
We are a professional factory with 10 years experience in the field of High and Low voltage switchgears,Substation,transformers,cable distribution box and various electrical equipment, such as vacuum circuit breaker , load break switch etc.
Our factory is the excellent supplier of State Grid Corporation of China.

2. Do you accept customized serveice?
We offer OEM/ODM service, can print your logo on product. our professional technical and quotation team can provice a satisfied project according to your drawing and parameters.
3. What is your MOQ?
Our MOQ is 1 piece.
4. How long is your delivery lead time?
It depends on your product requirement and quantity. Generally, 5~10 working days is 
available.
5. How do you solve quality problems?
Please porvide detailed photoes of quality problems. our technical and quality testing department will analyse.we will make a satisfied soluton within 2 days.
6. What is your payment terms?
30%T/T in advance,70% before shipment. West union, L/C are also acceptable.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier