Product Description
This product is developed by absorbing the latest advanced technology from abroad and combining with the actual situation in China. The whole product has the characteristics of small size, easy installation and maintenance, low noise, low loss,anti-theft, strong overload capacity, and full protection. It is suitable for new residential areas, green belts, parks, station hotels, construction sites, airports and other places.
ZGS13-H series American prefabricated box-type substation is suitable for 10kV ring network power supply, dual power supply or terminal power supply system, as transformer, metering, compensation control and protection device.
This product meets the following standards: GB / T17467-1998 "High-voltage low-voltage prefabricated substation", DL / T537-93 "Technical conditions for ordering 6-35kV box-type substation"
Operation condition
1. Altitude: 1000m and below:
2. Wind pressure: no more than 70Pa(equivalent to 35m/s):
3.Humidity: daily average is not more than 90%, and monthly average is not more than 90%;
4. Ambient temperature: maximum temperature +40'C, minimum temperature -25ºC:
5.Shockproof level: horizontal acceleration 0.4/s2; Vertical acceleration 0.15m/s2:
6. Earthquake intensity: 8 degrees:
7.Installation environment: the surrounding air is free from obvious pollution by corrosive, flammable gases and water vapor, and the installation site is free from violent vibration.
Architectural feature
The cabinet structure of the series products is divided into two parts. The front is the high and low pressure operation interval. The high voltage interval includes high voltage terminal, load switch, no-load pressure regulating tap switch, plug-in fuse, pressure release valve, oil temperature meter, oil level meter and oil discharge valve. The low pressure interval includes low pressure terminals. The rear part is the oil filling box body and heat sink, the transformer windings and iron core, the high-voltage load switch and the protective fuse are all in the
oil storage tank.
Features and advantages
1.Small in size and compact in structure, it is only about 1 /3 of the domestic variation of the same capacity box;
2.Fully sealed, fully insulated, no need of insulation distance, reliable guarantee of personal safety;
3.It can be used for both the ring network and the terminal, which is very convenient for conversion and improves the reliability of power supply;
4.Small loss, lower than domestic S9 transformer loss;
5.The cable connector can operate 200A load current, which can be used as a load switch operation in an emergency, and has the characteristics of isolating switch;
6.Double fuse protection is adopted to reduce operation cost. The fuse of plug-in fuse is double sensitive (temperature, current);
7.Adopted /Y. The connection method and three-phase five-column structure have the advantages of high voltage quality, no drift of neutral point. no heat, low noise and good lightning protection.
Detailed Photos
Product Parameters
Company Profile
Shenheng Power Equipment CO., LTD is a company specializing in the production of high and low voltage switch power transmission and distribution equipment and high, low voltage electrical components, one of the professional production enterprises, the production of all fully insulated and fully sealed inflatable cabinet, intelligent solid insulation ring main unit, outdoor high voltage cable branch box, box-type substation, etc. Product quality is stable, reliable, It is deeply trusted and approved by the customers.
Manufacturing of the main products are YBW box-type substation, KYN61-40.5, KYN28A - 24, KYN28A - 12, XGN2-10, HXGN-10 high voltage switchgear, XGN ring net cabinet, SHSRM inflatable ring main unit, SHSG solid ring main unit, MNS, GCS, GCS, GGD, XL low voltage switchgear , vacuum circuit breaker , oil immersed transformer , dry type transformer , current /potential transformer,load break switch and other transmission and distribution equipment.
For a long time also for all kinds of metallurgy, shipbuilding, electric power, mining, and intelligent buildings, high-rise buildings, hospitals, schools and other industries to provide high quality power transmission and distribution of complete sets of equipment and electrical control equipment. The company has a strong technical force, sophisticated technology and sophisticated testing methods, and the products sell well across the country.
Certifications
Packaging & Shipping
FAQ
1. Are you a trading company or manufacturer ?
We are a professional factory with 10 years experience in the field of High and low Voltage switchgears, Substation ,transformers,cable distribution box and various electrical equipment, such as vacuum circuit breaker , load break switch etc.
Our factory is the excellent supplier of State Grid Corporation od China .
2. Do you accept customized serveice ?
We offer OEM/ODM service , can print your logo on product . our professional technical and quotation team can provice a satisfied project according to your drawing and parameters .
3. What is your MOQ?
Our MOQ is 1 piece.
4. How long is your delivery lead time ?
It depends on your product requirement and quantity . Generally , 5~10 working days is avaliable .
5. How do you solve quality problems?
Please porvide detailed photoes of quality problems. our technical and quality testing department will analyse.we will make a satisfied soluton within 2 days .
6. What is your payment terms ?
30%T/T in adcance,70% before shipment . West union , L/C are also acceptable .
){kind=link}
){kind=link}